PPI License For A Charging App Wallet: RBI Rules, Closed vs Semi-Closed, And When You Need One

💡 PPI License For Charging Wallets: Key Highlights

  • Single-network wallets are usually outside RBI’s net: a balance that can only buy your own charging sessions is a closed system PPI, which the RBI does not treat as a payment system needing authorisation.
  • Roaming wallets are where eMSPs get caught: once the balance pays for sessions on other operators’ chargers, it can become a payment to third-party merchants, and that needs an authorised issuer.
  • Your own PPI license is capital-heavy: a non-bank issuer needs ₹5 crore net worth at application, ₹15 crore by the end of its third financial year, and an escrow account covering every rupee outstanding.
  • Most operators partner instead: 48 non-banks and 63 banks were authorised or approved to issue PPIs at end-March 2025, and a co-branded wallet from one of them avoids the capital requirement.
  • The rules are moving: the RBI’s April 2026 draft Master Direction keeps the own-goods exemption but explicitly excludes marketplaces from it.

If your charging app lets drivers top up a balance before they plug in, you are holding their money, and the first question is whether that needs a PPI license from the Reserve Bank of India. A prepaid payment instrument (PPI) is the RBI’s term for any stored value used to buy goods and services, and an in-app wallet is one. This guide is written for Indian charge point operators (CPOs) and eMobility service providers (eMSPs) that hold, or plan to hold, driver balances in their app.

The short answer: most single-network wallets sit in the unregulated closed-system category, and most roaming wallets do not. Where the line falls depends on who sells the charging session and who ends up with the money. Below, three charging cases are walked to a verdict, followed by the routes to authorisation, the accounting, and designs that avoid holding balances. Other markets have their own regimes (e-money rules in the EU and UK, for example), so this guide covers India only.

Not legal advice. This article summarises the RBI Master Directions on Prepaid Payment Instruments (27 August 2021, updated as on 30 September 2026) and the draft Master Direction released on 22 April 2026. Paragraph references are to the 2021 text. Confirm how they apply to your business with counsel.

Closed vs Semi-Closed PPI: What The RBI Actually Regulates

The governing text is the RBI’s Master Directions on Prepaid Payment Instruments, issued on 27 August 2021 under the Payment and Settlement Systems Act, 2007. It is still the version in force: the RBI site shows it updated as on 30 September 2026. It sorts prepaid instruments into two camps.

Closed system PPIs

Paragraph 2.1 describes them as instruments “issued by an entity for facilitating the purchase of goods and services from that entity only”, with no cash withdrawal. Because they cannot pay third parties, issuing and redeeming them is not classified as a payment system, so the RBI neither authorises nor supervises them. A coffee chain’s in-app balance is the textbook case.

PPIs that need authorisation

Any instrument that pays someone other than the issuer needs RBI approval (for banks) or authorisation (for non-banks) before it is issued. The old three-way scheme called these semi-closed PPIs: balances usable at a group of merchants under contract with the issuer. The 2021 Directions replaced that label with two types, small PPIs and full-KYC PPIs. “Semi-closed wallet” is still the phrase most operators use, and it means the same thing: a wallet that pays more than one merchant.

TypeWho can issueKYCBalance limitsOther rules
Closed system PPIAny entity, for its own goods or servicesNot prescribed by the RBINot prescribed by the RBINo cash withdrawal; not regulated or supervised by the RBI
Small PPIRBI-authorised bank or non-bankOTP-verified mobile number plus minimum details₹10,000 outstanding; ₹10,000 loaded a month; ₹1,20,000 a financial yearNo cash-out or fund transfer; must convert to full KYC within 24 months
Full-KYC PPIRBI-authorised bank or non-bankFull KYC₹2,00,000 outstandingInteroperability mandatory (wallets through UPI)

PPI categories under the RBI Master Directions on PPIs, 2021 (paras 2.1, 2.8, 9.1, 9.2 and 11.4).

So the test comes down to one question: whose goods or services does the balance buy? If the answer is always yours, you are probably in the closed category. If any rupee of it pays someone else, you need a regulated issuer behind the wallet.

Does Your Charging Wallet Need A PPI License? Three Cases

Apply that test to the three ways charging apps actually use stored balances.

Case 1: the balance buys only your own sessions

A CPO runs 40 sites under its own brand. Drivers top up ₹1,000, and each session’s energy charge, idle fee and GST are debited from that balance. Every rupee buys a service the CPO itself sells, so this is a closed system PPI and needs no PPI license. It is how most single-network apps work, and it holds even when the chargers come from several OEMs or sit on a host’s land under a revenue share. What matters is that the CPO sells the session to the driver and settles the host’s share under a separate contract.

Case 2: the balance pays for roaming sessions on partners’ chargers

Now the same driver plugs in at another operator’s charger, reached through OCPI roaming. The session is the partner CPO’s service, and your wallet pays for it. This is the case that catches eMSPs. Whether the wallet stays closed turns on the contract. If you buy the session from the partner at a wholesale rate and resell it to the driver at your own tariff, on your own invoice, you can argue the driver is still buying from you. If your app simply passes the driver’s money through to the partner CPO, the wallet is paying a third-party merchant. That is a PPI which needs authorisation.

The draft Master Direction on PPIs, 2026 makes the second reading more likely. Its exemption covers an entity “other than a marketplace” issuing an instrument for purchases from itself. An app that lists many operators’ chargers and settles with each of them looks more like a marketplace than a single seller. An eMSP whose pitch is “one wallet, every network” should assume it needs a regulated issuer from day one, and build its eMSP software and OCPI roaming integration around that settlement flow.

Case 3: the balance is spent at a café or retail partner on site

A highway site host runs a café, and the CPO’s app lets drivers spend wallet credit on coffee while they charge. The café is a separate merchant, so this falls outside the closed-system definition. Spending ₹150 of balance at a partner’s counter is, in the RBI’s terms, a semi-closed payment. Either drop the feature, route café spend through UPI, or put a regulated issuer behind the wallet.

CaseWho sells to the driverLikely categoryWhat to do
Own network onlyYouClosed system PPINo authorisation; record in your terms that the balance buys only your sessions
Roaming via OCPIThe partner CPO, unless you resellNeeds authorisation if money passes throughResell and invoice the session yourself, or use a regulated issuer
Café or retail partnerA third-party merchantNeeds authorisationUPI for partner spend, or a regulated issuer

How the closed-system test applies to three common charging-wallet designs.

When You Need A PPI License: Your Own Authorisation Or A Partner Issuer

If the wallet must pay third parties, there are two ways to stand it up.

Route 1: apply for your own PPI authorisation

Non-bank applicants must be companies incorporated in India (para 4.2). They need a minimum positive net worth of ₹5 crore at application, certified by a chartered accountant, rising to ₹15 crore by the end of the third financial year after final authorisation and maintained at all times (para 4.5). Once live, the issuer keeps the outstanding balance in an escrow account with a scheduled commercial bank. At day-end, the escrow can never fall below the value of outstanding PPIs plus payments due to merchants, and auditors certify this every quarter and every year (para 12.3). On top come KYC under the RBI’s KYC Master Direction, mandatory UPI interoperability for full-KYC wallets and, since the January 2026 Internal Ombudsman Directions, an internal ombudsman for any non-bank issuer with more than one crore PPIs outstanding.

Authorisation runs in two stages, in-principle and then final, and an applicant cannot operate until the final certificate is issued. The RBI Annual Report 2024-25 counts 48 authorised non-bank PPI issuers at end-March 2025, up from 38 a year earlier, plus 63 banks. For a CPO whose drivers hold ₹50 lakh of balances, committing ₹15 crore of net worth to a payments business rarely makes sense.

Route 2: a wallet issued by a licensed bank or PPI issuer

The faster route lets an existing issuer hold the PPI license and the money, while the wallet sits inside your app. The 2021 Directions allow co-branding under the issuer’s board-approved policy (para 7.11), with two conditions that shape the product. The issuer’s name must appear prominently on the instrument. Where a bank and a non-bank co-brand, the bank is the issuer, and the non-bank’s role is limited to marketing, distribution or access to services. KYC, escrow, limits and complaints become the issuer’s job, while tariffs, sessions and the driver experience stay yours.

Own PPI authorisationPartner-issued wallet
Capital₹5 crore net worth at application, ₹15 crore by year threeNone for the PPI itself; commercial fees to the issuer
TimeTwo-stage RBI process; no operations before final authorisationIssuer onboarding and an integration project
KYCYou run it, under the RBI KYC Master DirectionThe issuer runs it, inside your app’s flow
Driver moneyYour escrow account, audited every quarterHeld by the issuer
BrandingYours aloneCo-branded; the issuer named prominently
FitsA large eMSP for which payments is a business lineMost CPOs and eMSPs

The two routes to a wallet that can pay third parties, per the RBI Master Directions on PPIs, 2021 (paras 4.5, 7.11 and 12.3).

What A Wallet Balance Is On Your Books

A closed wallet needs no RBI license, but it still changes your balance sheet. A top-up is not revenue. It is money received for a service not yet delivered, so it sits as a liability (unearned revenue, or a contract liability) until a session draws it down. Revenue is recognised as the kWh are delivered, one session at a time.

Three consequences follow. First, your bank balance overstates what you have earned by the size of the float: 20,000 active drivers holding an average of ₹500 each is ₹1 crore of other people’s money. Second, expired or abandoned balances cannot be written back to profit on your own timetable. Authorised non-bank issuers are barred from moving them to profit and loss for at least three years after expiry (para 13.3), and a closed-system operator should agree its own treatment with its auditor. Third, when GST falls due on a prepaid top-up is a separate question, covered in our guide to GST on EV charging.

In practice, your payment and billing software should keep the wallet ledger separate from session revenue. Then the liability can be read off a report each month, rather than rebuilt from transaction logs at year-end.

Alternatives That Avoid Holding Balances

The simplest way to stay clear of PPI rules is not to hold driver money at all. Four designs do that.

  • UPI pay-per-session: the driver pays for each session by UPI, the money lands in your account, and nothing is stored. Unified Bharat eCharge (UBC) builds on this for discovery and payment across networks; see our UPI and UBC explainer.
  • Card pre-authorisation: a hold is placed on the driver’s card when the session starts and captured for the actual amount at the end. Card data brings its own compliance scope, covered in our PCI DSS guide for charging.
  • Postpaid B2B accounts: fleets, employers and housing societies charge on credit and settle a monthly invoice. There is no prepaid balance, so no PPI question, only ordinary credit risk.
  • RFID with account billing: an RFID card for EV charging identifies the driver, while the money behind it sits in a postpaid account or a regulated wallet, not on the card.

Most networks run two or three of these side by side. A charging management system like YoCharge can run UPI, a prepaid wallet, RFID and separate tariffs for user groups such as fleets on the same network, with each ledger kept apart. For the full menu of methods, see our guide to EV charging payment options. For gateways, aggregators and settlement, see our EV charging billing integration guide.

Refunds, Dormant Balances And Closure

For authorised PPIs, balances stay valid for at least one year from the last load, holders are warned 45 days before expiry, failed-transaction refunds go straight back to the PPI, and a wallet idle for a year is made inactive after notice (paras 13 and 14.3). The April 2026 draft adds that on expiry or closure the balance returns to the source account or a verified bank account. None of this binds a closed-system wallet, but it is the standard drivers will judge you against, so match it in your refund policy.

Frequently Asked Questions

Not if the balance can only be spent on charging sessions you sell yourself. Under paragraph 2.1 of the RBI Master Directions on PPIs, that is a closed system PPI, which is not treated as a payment system and needs no RBI authorisation. You need an authorised issuer once the balance pays any third party, such as a roaming partner or an on-site café.

A closed wallet buys goods or services from the issuer only. A semi-closed wallet pays a group of merchants under contract with the issuer, and it needs RBI authorisation. The 2021 Directions now call these small PPIs and full-KYC PPIs, with balance caps of ₹10,000 and ₹2,00,000 respectively.

A non-bank applicant needs a minimum positive net worth of ₹5 crore at application, rising to ₹15 crore by the end of the third financial year after final authorisation, and it must keep driver balances in an escrow account with a scheduled commercial bank. Most CPOs avoid this by offering a wallet issued by a bank or an already-authorised PPI issuer.

Yes, but usually not as a closed wallet. If the balance pays partner CPOs for their sessions, it is paying third-party merchants and needs an authorised issuer. The exception is a resale model, where the eMSP buys each session wholesale and invoices the driver itself; confirm that structure with counsel, because the 2026 draft excludes marketplaces from the closed-system exemption.

The RBI released a draft Master Direction on PPIs, 2026 on 22 April 2026, with comments due by 22 May 2026. Its effective date is still blank, so the 2021 Master Directions, updated as on 30 September 2026, remain the rules in force. Keep your wallet design under review until the final text is issued.

Sources: RBI Master Directions on Prepaid Payment Instruments (27 August 2021, updated as on 30 September 2026) | RBI Draft Master Direction on PPIs, 2026 | RBI press release on the draft PPI Direction (22 April 2026) | RBI FAQs on Prepaid Payment Instruments | RBI Annual Report 2024-25, Chapter IX | RBI Internal Ombudsman Directions for non-bank PPI issuers (14 January 2026)

Run Wallets, UPI And Fleet Accounts On One Network

What happens next?

A review of your current payment flows

Wallet and roaming design session

Tariff, ledger and settlement walkthrough

Go-live and ongoing support

Talk To Our Payments Team

Scroll to Top